Our Residential Products
Advanced Hot Water
Solutions. Built to Perform.
Best Sellers

ACT2

ACT2-LED-B

ACT2-LED-R

ACT2-BTKIT

ACT2-HWMS-O

ACT2-BTKIT-1T

ACT2-BTKIT-L

ACT2-MS-BTKIT

ACT2-BTR

ACT2-BTKIT-FX

ACT2-Retrofit-BTKIT
Homes Over 4,000 ft²

SS3-200-2

SS3-200-2-PFS
Frequently Asked Questions
Which D’MAND Kontrols® system is right for my home?
The right system depends primarily on whether your home has a dedicated hot-water return line, the size of the home, the type of water heater, and the length of the plumbing runs. Homes up to approximately 4,000 ft² with a dedicated return line generally use an ACT2-series system. Homes without a dedicated return line can use retrofit configurations such as the ACT2-BTR. Larger homes and longer plumbing runs may require an SS3-200-series system. If you’re unsure, contact our team and we’ll help you select the correct model.
Do I need a dedicated hot-water return line?
No. D’MAND Kontrols® offers solutions for homes both with and without dedicated return lines. If your home does not have a return line, select retrofit configurations are designed to create the recirculation path at a fixture, allowing many existing homes to add on-demand hot-water recirculation without installing a new dedicated return pipe. The ACT2-BTR, for example, is designed for homes without a dedicated return line and installs beneath a common kitchen or bathroom sink.
Will D’MAND Kontrols® work with my water heater?
D’MAND systems are available for tank, tankless and heat-pump water-heater applications. The exact model should be selected based on your water heater, plumbing layout, home size and pipe-run length. The ACT2 family, for example, is designed for dedicated-return applications up to 4,000 ft² with tank, tankless or heat-pump water heaters.
How quickly will I get hot water?
D’MAND Kontrols® controls when the recirculation pump operates so you can move hot water through the plumbing before opening the fixture. Actual delivery time depends on your plumbing layout, distance from the water heater and the flow performance of the pump. A higher-flow compatible pump can reduce delivery time, but a pump upgrade is not necessarily required to begin reducing wasted water.
How do I activate the system?
Activation depends on the D’MAND package you choose. Options include hardwired buttons, Bluetooth transmitters and motion sensors. This lets homeowners choose an activation method that fits how different bathrooms, kitchens and fixtures are used. The Residential Solutions page currently offers configurations containing each of these activation options.
Does the pump run continuously?
No. Unlike traditional continuously operating recirculation systems, D’MAND Kontrols® is designed around on-demand operation. The pump operates when hot water is requested and stops when the system determines circulation is no longer needed, helping reduce unnecessary pumping and heat loss.
How much water can a D’MAND system save?
A typical household can save approximately 8,000–12,000 gallons of water per year by reducing the water normally sent down the drain while waiting for hot water to arrive. Actual savings depend on household use, plumbing layout and previous wait times.
I'm still not sure which system I need. Can you help?
Absolutely. You don’t need to determine the model on your own. Tell us your approximate home size, water-heater type, whether you have a dedicated return line and anything you know about your plumbing layout. Our team can help identify the appropriate D’MAND Kontrols® solution.
Save Water
Save Energy
Save Time
Save Money

